How do you remove stickers from tiles? Ways that actually work well!
How do you remove stickers from tiles? The best ways to remove stickers from ceramic tiles are:
– Rubbing alcohol
– Warm vinegar
– Soaking in oil
– Adhesive solvent
– Peanut butter
There are many instances in which manufacturer stickers stay on the tiles. During packing, there might be a residue of tape adhesive on the floor and it creates quite a dirty mess. Fortunately, tiles can be considered as user-friendly surfaces when it comes to the removal of manufacturer stickers or tape residue.
You can use common household products such as vinegar or peanut butter to remove the sticker. If the sticker is firmly pasted on the tile then you can make use of commercial solvents. Here are four methods through which stickers on tiles can be removed.
Do It Right In The First Place
If you have been using tile stickers and then taking them off your tiled wall you might see some glue residue left behind. There are ways to clean the glue and this article is explaining how to do it but what works best is to minimize or even eliminate the problem completely in the first place by getting the right stickers.
Use good quality stickers to reduce the problem in the first place. However, it is not easy to get good quality stickers for sensible money but we have done the hard work for you and so you can see the list below with really good stickers for very good value.
Nonetheless, it must be mentioned that all good tile stickler will always leave some glue on a wall tile, the difference is that good quality will leave less of it.
Ok, but How do you remove stickers from tiles?
Rubbing alcohol is a good way of removing tile sticker residue. (If you do not have any other alcohol then, you can even use vodka but that I would be an expensive option).
The process is easy to follow if you were using cooking oil method then alcohol is just the same way (we write more about it below). Simply dampen a cloth with rubbing alcohol, lay that cloth over the area with sticky residue, next wait just a couple of minutes until the alcohol dissolves the glue.
Then, remove sticker residue by rubbing away the cloth or with a plastic scraper, your fingers or lingering material. This method usually works very well.
Heat some white vinegar in a pan
You should take care not to bring the pan to boiling temperature. Make sure that the cloth rags are clean. Dip the cloth rag into the heated white vinegar.
Now squeeze the cloth rag on the tile sticker and dab at it. Keep the vinegar-soaked cloth rag on the sticker for about 30 minutes. Now remove the rag and using a scraper, peel the sticker off. Make sure that you use a soft-edged scraper so that the tile is not scratched.
If there is any trace presence of sticker adhesive, repeat the process again.
Pour some oil on the sticker and let it soak for about 20 minutes.
Now gently scrape the sticker surface with the plastic handle of a utensil.
Make sure to perform the procedure again if there is any sticker left on the tile. Use dish soap to wash the area on which oil was applied.
Make sure to wash the tile multiple times so that there is no trace of oil residue.
You can also use an adhesive solvent that is available for commercial purpose.
One of the answers to the question of how do you remove stickers from tiles? is, acetone would be a good choice to remove the sticker. Soak the area around the sticker with the solvent for 15 minutes.
Now the scraping process has to be done with care. Gently scrape the soaked area with a plastic scraper. After scraping, use water and detergent to thoroughly cleanse the surrounding area to remove traces of the solvent. Alcohol is known as an effective way to remove the sticker on the tile. Soak the sticker by pouring alcohol on it and leave it for 30 minutes.
After some time the sticker surface gets wet and you can scrape off the sticker.
Apply some peanut butter on the sticker and let it stay for 30 minutes.
Now wipe the sticker a surface using a cloth. If there is any remaining sticker, repeat the process.
Stickers can also be removed from the tiles using a mixture of baking soda and water. The mixture is in the form of a paste. Apply the paste on the sticker area and wait for some time, usually around 30 minutes. Now use a cloth to wipe the sticker surface.
It should come right off the tile. Repeat the process if needed.
Now you understand, how do you remove stickers from tiles?
You can remove the sticker from the tiles using common household products or you can opt for a more professional approach by making use of solvents.
Great care must be taken during the process of soaking so that the surrounding area is not affected by spillage. Exercise caution when warming oil or vinegar on the stove. It is pertinent that the temperature of the heated substance should not reach boiling point.
These methods will work absolutely well for all types of stickers ranging from manufacturer stickers to adhesive residues. Make sure that the cloth rags which are used to wipe the surface are clean. Always wear gloves to carry out the cleaning exercise especially in the case of solvents.
Also, use some good quality tile stickers listed here:
Here we have some more interesting articles that you might like:
